7 A.M. Enfant PLUSHPOD User Manual - Page 2

Browse online or download pdf User Manual for Baby Accessories 7 A.M. Enfant PLUSHPOD. 7 A.M. Enfant PLUSHPOD 2 pages.

Print Page
FRONT
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
HOW TO ONLY USE FRONT PANEL COVER
On Stroller
On Car Seat
WARNING:
Never leave child unattended in this product. Make sure that the child's face is not covered by any part of this product. Child should never be placed face-down in this product. Do not use this
product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use care when using zippers to avoid injury to the child.
User Manual
PLUSHPOD
HOOK & LOOP OPENING
SOFT FAUX
SHEARLING LINING
WAXED COTTON
OUTER SHELL
SPACIOUS POCKETS
PANEL COVER ONLY
1
Place the WaxedPOD onto the stroller.
3
2
Optional: Put integrated mounting slip
on back side of hood over the top of the
stroller seat to prevent footmu from
slipping.
4
1
1
Seat your child in the stroller or car
seat and fasten the safety harness as
per their manufacturer's instructions.
Unzip the front panel cover. Save the
2
WaxedPOD's back for later use.
Slip the front panel's inner bottom
3
pouch over the bottom of the stroller
or car seat to secure the cover.
The PlushPOD is machine washable. The care label is
located on the internal side of the product.
Use the hook & loop straps located
5
Pull the stroller's 5-point harness
on the sides of the WaxedPOD to
through the opening slits located on
attach to the stroller's back or
the back of the WaxedPOD by
sidebars in order to secure it.
choosing the height of the slits
corresponding to your child's size.
Unzip the WaxedPOD cover.
Seat your child on the WaxedPOD in the
6
stroller and fasten the safety harness
as per manufacturer's instructions.
Detach the removable back panel to
2
Place the WaxedPOD onto the car
reveal the large back opening and to
seat and unzip the front panel to
eliminate material between your
open the WaxedPOD.
baby's back and the car seat. Store it
Pull the car seat's 5-point harness
3
for stroller use.
through the large back opening.
Pull the elastic drawstring under the
4
pouch to adjust tightness.
2
1
REMOVABLE
PANEL
4
3
5
BACK
HOOK & LOOP STRAPS
Zip the WaxedPOD cover up and adjust the
7
snugness using the elastic drawstring
located underneath the top flap to create a
smaller enclosure around your child's face.
To further envelop your child's head,
8
connect the side flaps to the hood with
the hook & loop fasteners.
4
Seat your child on the WaxedPOD in
the car seat and fasten the safety
harness as per manufacturer's
instructions.
5
Zip the WaxedPOD cover up.
Use the hook & loop straps located on
5
the sides of the front panel cover to
attach to sidebars.
6
Use the elastic drawstring located
underneath the top flap to adjust the
snugness.
HOOD
HOOK & LOOP STRAPS
5-POINT HARNESS
OPENING
3 ADAPTABLE SHOULDER
HARNESS SLITS
2 ADAPTABLE CROTCH
HARNESS SLITS
ANTI SLIP BACK