Great Little Trading Alba L4472 Manual - Page 2
Browse online or download pdf Manual for Indoor Furnishing Great Little Trading Alba L4472. Great Little Trading Alba L4472 11 pages. Corner base unit & top shelf
Print Page
Safety Warnings:
Please read these instructions carefully before assembly.
•
During assembly children should be kept away from the product due
to possible risk of injury.
•
Assemble and use on a flat and level surface.
•
This product is heavy, we recommend that you build it where you are
planning to use it.
•
This unit can only be used in conjunction with other Alba Corner
units. All stacked Alba furniture must start with a GLTC Alba base unit.
•
It is recommended that the Alba range is only stacked 3 units high i.e.
1x corner base + top shelf & 2x corner shelf units.
•
DO NOT use power tools in the assembly of this product as there is a
risk of over tightening and consequently splitting of the wood.
•
Do not over tighten hardware. Cam dowels should be inserted to
the collar. Back panel screws should be screwed until they naturally
tighten/stop. This is difficult to feel if power tools are being used.
•
WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing
injuries can occur from furniture tipping over. Ensure you secure this
furniture product to the wall before you use it, using the kit provided.
If you have not received an anti-tip kit with your product please
contact Customer Services.
•
To avoid possible injury from tipping - DO NOT allow children to step
or climb on the product.
•
Check all fixtures and fittings regularly and tighten as necessary.
•
Remove all packaging before allowing your child to use the product.
•
Please retain for future reference.
Customer Service:
•
If you find that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
•
We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
•
Wipe clean using a soft damp cloth followed by a dry cloth.
•
Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
•
Do NOT expose the item to extremes of heat and humidity.
•
Regularly check all fastenings, fixtures and fittings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we'd be grateful if you could let us know; we'll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [email protected]
Thank you
2