Great Little Trading Blake Cube Storage Long Shelf Unit Manual - Page 8

Browse online or download pdf Manual for Indoor Furnishing Great Little Trading Blake Cube Storage Long Shelf Unit. Great Little Trading Blake Cube Storage Long Shelf Unit 10 pages.

Print Page
Great Little Trading Blake Cube Storage Long Shelf Unit Manual
STEP 9:
Take base panel F and position with the multi-drilled side
face up as shown.
Attach the 2x side skirting bars (J) to panel F using 4x
25mm wood screws (#8) in the position shown. The
recessed holes on the bars should be facing up.
When in place, attach the central foot (L) to panel F. Turn
panel F on its side to do this and position the foot using
1x 25mm wooden dowel (#9), then insert 1x hex bolt
(#5) into the foot from the other side of panel F. Tighten
fully.
#8
L
J
#8
BASE
F
#9
TOP
#5
STEP 10:
Return base panel F to be flat on the floor and
attach the long skirting bars (K) to the base panel.
Position the bars along the edges of the base using
2x 20mm wooden dowels (#3) for EACH bar, then
fix in place using 5x 25mm wood screws (#8) for
EACH bar. Tighten fully.
Note: The recessed holes on the bars should be
facing up.
#8
#8
#3
#8
#8
K
#3
F
Hardware for Step 9:
1x #5 Hex Bolts (42mm)
4x #8 Wood Screws
(25mm)
1x #9 Wooden Dowels
(25mm)
#8
*Please Note: The rest of
J
#8
the feet will be attached later.
Hardware for Step 10:
4x #3 Wooden Dowels
(20mm)
10x #8 Wood Screws
(25mm)
#8
#8
K
#8
#8
#3
#8
#8
#3
STEP 11:
Attach base panel F to the unit.
Start by inserting 10x 20mm wooden dowels (#3) into
the two inner holes of the open edges of panels B,
2xC, D & E.
Now insert 10x barrel nuts (#4) into the holes on
the sides of panels B, 2xC, D & E. Ensure the holes in
the nut are pointing towards the edge where the base
panel is joining.
With the grooved edge of the base panel facing up,
align base panel F with the wooden dowels on the built
unit and push into place.
Now insert 10x cross-head bolts (#7) into the holes as
shown. Fully tighten to secure the base.
TOP
B
2x
#4
2x
#4
C
D
2x
#3
8
Hardware for Step 11:
10x #3 Wooden Dowels
(20mm)
10x #4 Barrel Nuts
10x #7 Cross-head Bolt
(47mm)
E
2x
#4
2x
#4
2x
2x
#4
C
2x
#3
2x
#3
F
#7
2x
#3
#7
#7
#7
BASE
#7
#7
#3
#7
#7
#7
#7