Hi-ltte RAMBO330 3in1 Series User Manual - Page 5

Browse online or download pdf User Manual for Light Fixture Hi-ltte RAMBO330 3in1 Series. Hi-ltte RAMBO330 3in1 Series 9 pages. 330w 3in1 beam-spot wash

Print Page

PACKING AND SHIPPING

4 . 3 P a c k i n g

1.Disconnect the power supply so that the lamp to cool completely before packaging equipment, at least 15 minutes or more.

2.Closing the light protect lock, when clean the surface of the light dust

3.Cover the light , seize the equipment both sides aluminum handles on to make it upside down and gently placed in the box.

4.Add lighting accessories after placing the light in box.

5.Up to two crates stacked prohibited upside down.

4 . 4 U n p a c k i n g

1.Open the box and bag

2.Seizing the equipment handles, lifting and carrying away the light from the box .Or opening the flight case cover，

placing lift boom close to the light base, then equiping light hook on light base bottom.

tightening Quick Install locks. At last rising away boom to the top of the lamp from flight case, put the flight case away.

3.Before turing on the light,should open the light protecting lock

Note: Upon receipt of lamps, please check if there is damage to the fold closure caused by transport,

where there is transportation damage, please do not use this fixture, and as soon as possible contact

Users should ensure that light and installation materials are checked for regular safety checks, Unprofessional incorrect

installation can lead to dangerous, if the lack of working conditions and professional standards, please operate the light

by professionals. Do not use the light if the working temperature isn't 15°-40° .When the lighting installation, dismantling,

moving, or servicing, do not stand directly beneath the lamp. The operator must ensure that the fixtures are secure

connection, installing the light after professionals approving electrical parameters， make sure that these installation

must be checked at least once per year by experts

5 . 1

I n s t a l l a t i n g r i g g i n g

RAMBO-330W beam moving head lights can be placed on the stage or on a stand in any direction，Quick lock system can

quickly and easily remove or install a light hook.

Note: must use two clamps fixed equipment, and are 1/4 buckle fastening jig, only fully rotated 90

degrees clockwise to lock fastener.

5 . 2 F i x e d e q u i p m e n t

1. Before installing fixtures， must verified rigging equipments are not damaged,

and can bear at least 10 times of light's weight. Check the building can be beared

at least 10 times of total weights of light, fixture, and cable accessories

2.Insert the locked hook fastener into base mounting holes horizontally, grab the

handle clockwise 90 degrees fasteners, in the same way to install a second fastener,

make sure the fastener is fastened under the light base.

3.If truss can be lifted， the equipment can be directly clamped from flight case

and locked fixture base. Then hung on the light and using safety rope fixed it.

Before rising the light to right height, connect the power cord and

signal cable.

Note: add a safety rope attached the light's base insurance shelf,

do not connect the device handle.

INSTALLATION

safe rope