Great Little Trading L5288 Quick Start Manual - Page 9
Browse online or download pdf Quick Start Manual for Indoor Furnishing Great Little Trading L5288. Great Little Trading L5288 10 pages. Small townhouse bookcase
Print Page
Hardware for Step 11:
4x #3 Wooden Dowels
4x #1 Cam Locks
#3
#1
#3
STEP 11:
Prepare to attach the roof by inserting 4x wooden dowels (#3) into the
inner holes on the ends of both side panels (A & B).
Bring the completed roof (G & I) to the unit, keeping the recessed edges
facing up. Open out the pivoting cam dowels so they can be received by
the side panels and carefully push the roof into place using the wooden
dowels to guide the positioning.
Once the roof is in place, insert 4x cam locks (#1) into the large drill
holes on the side panels (A & B).
Again, as per step 11, turn each cam lock a quarter turn clockwise first to
ensure the alignment is correct, then go back and fully tighten all four.
Note: If the roof is not quite aligned once attached to the bookcase, the
cam locks at the roof pitch can be loosened, adjusted and re-tightened to
correct the alignment.
#3
#1
#3
#1
A
#1
B
STEP 12:
Keeping the unit on the floor for the moment,
position the 3x back panels (J, K & L) into the
recessed edges of the unit as shown.
Ensure the drill holes on the panels are aligned
with the pilot holes on the unit and that the
panels are in the correct positions.
Insert 18x back panel screws (#6) into the holes
shown - please note there are 2 holes highlighted
that need to be left for the anti-tip kit applied in
step 13.
9
Hardware for Step 12:
18x #6 Back Panel Screws
J
K
L