HI-ND ST551T-02 Installation Manual - Page 2

Browse online or download pdf Installation Manual for Racks & Stands HI-ND ST551T-02. HI-ND ST551T-02 7 pages.

Print Page

IMPORTANT

Local installation rules must be obtained. A correct mounting is important and it is not the

responsibility of HI-ND Sweden AB. Faulty mounting may result in injury to persons. HI-ND

will not be responsible if the product has been mounted incorrectly. Expander bolts are not

included with the product. Properties and floor are specific for each case. Please make sure

the floor is straight and clean. Glue e.g PL600 can be used between the ground and the

bottom plate. Recommendation is to use below anchors

The Totem shall be fastened with 4 anchors in concrete. Follow below data for anchor type and

torque

h1: 7cm

Type: M10

50NM

inst