Active Tools CoxOrb Platinum User Manual - Page 7

Browse online or download pdf User Manual for Measuring Instruments Active Tools CoxOrb Platinum. Active Tools CoxOrb Platinum 8 pages.

Print Page

The information from stored work pieces can be transferred onto a Mac or PC using the

USB cable.

1. Ensure your CoxOrb is turned off and then press 'RECALL' until 'USB' is displayed.

2. Connect the USB cable supplied to the USB port on your computer and to the connector

on your CoxOrb. Your CoxOrb will appear as a removable drive in My Computer on

Windows computers and as a mounted volume on Mac computers.

3. Copy files to your computer in the normal way.

4. Delete any files off the CoxOrb that you don't want left on it.

To open graphs of your uploaded data you must have Excel installed on your Mac or PC

and have downloaded the Platinum Excel template file from the support page of our

website www.active-tools.com

1. Open the Excel template file (note Excel may ask you if it is safe to enable macros on this

document).

2. When opening the template file you will be prompted to import a Graph File. Locate the

folder that contains your CoxOrb .CSV Graph Files and select the one you wish to view.

3. Once you have selected a file your graphs will be automatically generated and displayed

in separate workbooks. There is also a workbook that contains the raw data.

4. Save your file, making sure to change the file name so as not to overwrite the template

file and repeat steps 1-3 for any other graph files you wish to view.

Battery Life

Charging

Full Charge

Changing the

Battery

Data and Audio Upload

Opening Uploaded Data in Excel

Battery & Charging

Battery Level Indicator.

Each bar represents approximately 20% of battery life

and a full battery gives around 6 hours of normal use.

Connect the charger to the Audio/Charging/USB

connector.

The battery takes approximately 3 hours to fully

charge from empty.

During the last 10-40 mins of charging your unit will

occasionally complete a memory clean up and during

this process it is not usable. When memory clean up is in

progress the unit will display 'MEM' .

When the unit is fully charged the backlight will turn

off and 'FULL' will appear.

Locate and press the dimple on the battery pack, twist

anti-clockwise and gently pull the pack off.

Reverse these steps to replace the pack.