Hi-Target SL300 series Manual - Page 14

Browse online or download pdf Manual for Receiver Hi-Target SL300 series. Hi-Target SL300 series 20 pages. Handheld gnss receiver gis data collection

Print Page

"ESC"

exit button: short pressit on boot-up state, means to cancel or exit the current window

operation.

"ENT"

Confirm button: ok button.

Switch machinebutton/backlight control button: long press it for more than 3 seconds

to turns on/off it. On boot-up state, hold the button for 1 second, switch on or off the

backlight .

Navigation button: move the cursor, to choice the options content.

Notice: when

temporarily, please close a backlight to save electricity, to extend industrial

GIS data collector work time.

MicroSD card

Can be used for storage of the collected data and program files. Program installation package can

be installed to program MicroSD card, just as installed in system disk space.

Note: the MicroSD cards (also named TF card) are small volume external flash memory

storage expansion CARDS, usually used in mobile phone, PDA, users should distinguish it

between the common SD card. The volume of ordinary SD card are larger than the

MicroSD card, not suitable for

series high precision mobile GIS product

present.

◊

The battery installation and removal

Install the battery, contact the battery with a metal connector on one end with

precision mobile GIS product

Take out the battery,take out the screw firstly, the battery will popup little, then you can take it out.

Figure 3-1

Qstar series high precision mobile GIS product

battery jar copper point, and screw up the screw.

can support 32 GB MicroSD card at most for

is not in work

Qstar

SL300 series high