DAYE DY907 Instructions - Page 4

Browse online or download pdf Instructions for Lawn and Garden Equipment DAYE DY907. DAYE DY907 4 pages.

Print Page

When choose any option, the statistics of 00:01 on the RUN TIME and other

statistics will flash. When stop working, it will stop flashing.

Note: The option of RUN TIME as well as twist button doesn't relate to any

sequence, as this is decide by the final position you choose.

11.The valve will turn on automatically

every other week at 9:00 AM

12.The valve will turn on automatically

every other week at 6:00 PM

IMPORTANT SAFETY INFORMATION

1.Warning: This timer is intended for outdoor, residential watering

applications only. Not intended for indoor or commercial use.

2.Use fabric reinforced hoses only; damaged or cracked hoses should not be

used.

3.Remove the timer from the faucet during freezing weather and store inside.

Exposure to temperatures below 0℃(32℉) may damage it.

4.Timer should not be submerged in water, used in damp pits or buried.

5.Check connections regularly for a tight seal.

6.When using for the first time, observe the progress for one week to ensure

that it is operating properly.

7.Before a long absence/vocation, insert new batteries and test your program.

8.When storing, turn to the [OFF ] position. Make sure that unit is completely

empty of water and in a frost-free environment only. Remove the batteries.

9.Use 2 "AA" alkaline batteries only. Do not use rechargeable batteries.

Do not mix old and new batteries. Do not mix alkaline, standard

(carbon-zinc), or rechargeable(nickel-cadmium) batteries.

10.Install new batteries at the start of the watering season.

11.Use timer in the proper orientation only. Do not use sideways, upside

down, etc.

12.No user-serviceable parts inside timer housing. Opening housing will avoid

warranty and cause potential leakage.

13.Caution: This timer contains internal electronic components that are

susceptible to damage by static electricity. If your timer begins to

malfunction, it is possible that your timer has been exposed to static

electricity. In such an event, you may reset your timer by removing and

re-installing the batteries.

14.Caution: Detach timer from spigot during freezing weather. Do not use

with water exceeding 100℉(38℃) or with pressures exceeding 100psi

(6.9bars). For pressures exceeding 100psi(6.9bars), consult a local plumber

for pressure regulation. Avoid pulling or tugging on the hose as damage to

the timer may result.

15.When the battery is in low battery, the mark of battery will flash, and then the

valve will turn off automatically. The valve will turn on again until re-insert

batteries.

16.If there are 'ERR' shows on LCD, which means the timer is not in normal

condition, and has to re-insert the batteries to re-set.

We hereby acknowledge that this product has passed CE Certificate.