DAYLIFF AQUASTRONG SMART 45 Installation & Operating Manual - Page 10
Browse online or download pdf Installation & Operating Manual for Water Pump DAYLIFF AQUASTRONG SMART 45. DAYLIFF AQUASTRONG SMART 45 16 pages. Water boosting pump
Print Page
Maximum Set Point
Well application
Tank below ground level
Tank above ground level
Boosting from well or tank
Boosting from mains
The pressure settings of 4.5, 5.0
and 5.5bar require a positive
inlet pressure and the settings
WARNING
must only be used when boosting
from the water mains.
4.4 Control Panel
Press 'switch' button to start the pump, press the switch button again to switch it off.
The pump can be changed automatically from Auto mode to forced start mode by
pressing down the switch button for 8 seconds.
Bar
3.0
3.5
4.0
3Bar
_
+
switch
down
up
8
4Bar
5.5Bar
5Bar
4.5Bar