Dynabrade 64500 Manual

Browse online or download pdf Manual for Grinder Dynabrade 64500. Dynabrade 64500 7 pages. Bandsaw blade grinder

Bandsaw Blade Grinder

Model:

64500 (120v) 1 Phase 60 Hz

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM

Read and understand this tool manual before operating your tool. Follow all safety rules for the protection of operating personnel as well

as adjacent areas. For safety information, refer to Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards (EN)

Hand Held Electric Motor Operated Tools – Safety Requirements and applicable State and Local Regulations.

Read and understand tool manual before

work starts to reduce risk of injury to

operator, visitors, and tool.

Eye protection must be worn at all times,

eye protection to conform to ANSI Z87.1.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

Carefully Read and save all instructions before operating or servicing any Dynabrade

Products offered by Dynabrade are not to be modified, converted or otherwise alerted from the original design without expressed

written consent from Dynabrade, Inc.

Warning: When using electric tools, basic safety precautions should always be followed to reduce the risk of a fire, electric shock, and personal injury,

including the following:

1. Mount tool securely. Always fasten tool to bench or other support structure to prevent tipping.

2. Keep work area clean. Cluttered areas and benches invite accidents.

3. Consider work area environment. Do not expose tools to rain. Keep work area well lit. Do not use power tools in damp or wet locations. Do not

use tools in the presence of flammable liquids or gases.

4. Guard against electric shock. Be certain machine is adequately grounded before operating.

5. Keep children away. Do not let visitors contact tool. All visitors should be kept away from work area.

6. Do not force tool. It will do a better and safer job at its intended rate.

7. Use the right tool. Do not force a small tool or attachment to do the job of a heavy duty tool. Do not use tool for purposes not intended.

8. Dress properly. Do not wear loose fitting clothing or jewelry. Clothes can be caught in moving parts. Wear protective hair covering to

contain long hair.

9. Use safety glasses. Also use face-shield or dust mask if operation area is dusty.

Tool Manual – Safety, Operation and Maintenance

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

WARNING

SAFETY LEGEND

WARNING

GENERAL SAFETY INSTRUCTIONS

Parts Page Reorder No. PD07•20

WARNING

Practice safety requirements. Work alert,

have proper attire, and do not operate tools under

the influence of alcohol or drugs.

WARNING

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

WARNING

Electric shock hazard. Avoid bodily contact with

grounded objects, bodies of water.

Do not damage cord set.

Abrasive Power Tool.

Effective May, 2007