Ceia PD240CH Instruction Manual - Page 14
Browse online or download pdf Instruction Manual for Metal Detector Ceia PD240CH. Ceia PD240CH 20 pages.
Print Page
12
Maintenance
3
Maintenance
3.1
Periodic maintenance
3.1.1
Cleaning
3.1.2
Battery
3.2
Troubleshooting
Signal or symptom
Alarm signal after start-
up.
Use a slightly moist, nonabrasive cloth for cleaning.
Do not wash the device with liquid detergents or chemical substances.
Keep the battery charger pins present on the metal detector handle and on the HHDS
module clean, to ensure proper electric contact.
In
of a prolonged period of storage/unuse Ni-MH batteries lose naturally
case
almost all their charge and then they might have difficulties in recharging. In
order to prevent that, we recommend that they undergo a complete charge
cycle at least every 4 months even when unused. Recharge the batteries every
month to keep them always ready to use (charge at 80% or more).
FI100K0025v1100 UK - - PD240CH
Probable cause
Start-up carried out
near a metal mass.
Electromagnetic
sources present near
the detector:
-
Other hand-held
metal detectors
with the same
operating channel
-
Walk-through metal
detectors or other
electromagnetic
sources in close
proximity
Action
Move the deìector away from the
metal mass and reset the detector
(refer to section "Alarm Reset".
Use hand-held metal detector with
different operating channel (using
the accessory
HHMD Configuration
).
Tool
Increase distance.
Use hand-held metal detector with
different operating channel (using
the accessory
HHMD Configuration
).
Tool