ADEMCO Accord User Instructions - Page 5
Browse online or download pdf User Instructions for Security System ADEMCO Accord. ADEMCO Accord 10 pages.
Print Page
- 1. Table of Contents
- 2. Full Set [1]
- 3. Part Set [2]
- 4. Night Set [3]
- 5. Unsetting
- 6. Unsetting after or During an Alarm
- 7. Testing the System [5]
- 8. Reprogramming Codes [8]
- 9. Isolating Zones [6]
- 10. Chime Facility [9]
- 11. Viewing the Alarm Log [0]
- 12. Indicators and What They Mean
- 13. System Settings
- 14. System Limitations
Two beeps confirm that the code has been
accepted.
The Master User Code is also needed to
programme other User Codes into the system.
For example, to programme in a new User
Code: enter the Master User Code, press 8
(Code), then the user number (say 2),
5678 8 2 4321.
USER 2 is now 4321.
Once a user has been programmed with a
User Code the user can re-programme their
own code, ie entering:
4321 8 2 9876
would re-programme user 2 as 9876.
Any user may delete their own code by:
entering their code + 8 + User No + √, ie:
9876 8 2 √
User 2 is now deleted.
The Master User Code can reprogramme or
delete any user.
CHIME FACILITY [9]
CHIME FACILITY [9]
Any zone can be programmed to give a Chime
(two beeps from the keypad and internal
sounder) when you activate the zone. To do
this enter your code, press 9 (Chime) then the
zone(s) you want to Chime. Press the √ √ key to
finish or wait for a confirmation beep.
To remove all zones from the Chime list, enter
your code and press the 9 (Chime) key, wait
for a confirmation beep then press the √ key.
VIEWING THE LOG [0]
VIEWING THE LOG [0]
The last 16 zone activations can be viewed by
entering your code then pressing the 0 key.
The most recent zones activations are
5