Gaggenau RW 464 Instructions For Use Manual - Page 11
Browse online or download pdf Instructions For Use Manual for Refrigerator Gaggenau RW 464. Gaggenau RW 464 18 pages.
Vacation mode
If absent for a prolonged period, you can switch the
appliance to energy-saving vacation mode.
When vacation mode is switched on:
▯
both climatic zones are set to a temperature
of 12 °C,
▯
the humidity function is switched off,
▯
the light is switched off.
Switching on
Press Holiday button ¶.
VACATION is displayed in the display panel.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
Rest mode
When Rest mode is switched on, the following
settings are switched off:
▯
Acoustic signal
▯
Interior light
▯
Messages on the display panel
▯
The background illumination of the display panel
is reduced
▯
Buttons are locked
Switching on
Press and hold down the setting button @.
1.
Press Holiday button ¶.
2.
Press the setting button @ and hold down for
3.
3 seconds longer.
The symbol VACATION flashes on the display
panel and RESTMODE is displayed.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
Humidity function
Independent from one another, the air humidity
in the two climatic zones can be increased.
Switching on
Press setup button μ.
1.
Press selection button ¿ until HUMIDITY and
2.
the current setting (ON/OFF) are displayed for
the particular climatic zone.
Press the setting button @, in order to reset
3.
the setting.
Press the setup button μ, in order to save
4.
the setting.
HUMIDITYis displayed in the display panel.
Switching off
Press setup button μ.
1.
Press selection button ¿ until HUMIDITY and
2.
the current setting (ON/OFF) are displayed for
the particular climatic zone.
Press the setting button A, in order to reset
3.
the setting.
Press the setup button μ, in order to save
4.
the setting.
HUMIDITY goes out on the display panel.
Alarm function
Switching off the warning signal
Press the alarm button ± to switch off the warning
signal.
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.
Usable capacity
Information on the usable capacity can be found
inside your appliance on the rating plate (see diagram
at chapter "Customer service").
11