Dynabrade 52907 Safety, Operation And Maintenance - Page 8

Browse online or download pdf Safety, Operation And Maintenance for Drill Dynabrade 52907. Dynabrade 52907 9 pages. .4 hp vacuum drill; pistol grip / central vacuum / rear exhaust

Print Page

Dynabrade 52907 Safety, Operation And Maintenance

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM

Dynaswivel

•

Swivels 360° AT TWO PIVOT POINTS allowing the air hose to

drop directly to the floor while providing superb tool handling.

Part No. 94300 – 1/4" NPT

Motor Tune-Up Kit

•

Includes assorted parts to help maintain and repair motor.

Part No. 96067

Dynabrade Air Lube

•

Formulated for pneumatic equipment.

•

Absorbs up to 10% of its weight in water.

•

Prevents rust and formation of sludge.

•

Keeps pneumatic tools operating longer with greater

power and less down time.

Part No. 95821: 4oz. (118 ml)

Part No. 95842: 1pt. (473 ml)

Part No. 95843: 1gal. (3.8 L)

Bearing Removal Tool

•

This tool is designed to pass through the I.D. of the bearing

plate and push against the I.D. of the bearing.

Part No. 96210

Portable Vacuum Systems

•

Dynabrade offers a wide assortment of

vacuuming options to choose from. To help

make your selection please request the most

current portable vacuum systems literature

form your local representative or by searching

our web site.

Reference Contact Information

1. American National Standards Institute – ANSI

25 West 43

Street

Forth Floor

New York, NY 10036

Tel: 1 (212) 642-4900

Fax: 1 (212) 398-0023

2. Government Printing Office – GPO

Superintendent of Documents

Attn. New Orders

P.O. Box 371954

Pittsburgh, PA 15250-7954

Tel: 1 (202) 512-1803

Visit Our Web Site: www.dynabrade.com

DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524

DYNABRADE EUROPE S.àr.l.,

Optional Accessories

3. European Committee for Standardization

Rue de Stassart 36

B - 1050 Brussels, Belgium

4. Power Tool Institute, Inc.

P.O. Box 818

Yachata, Oregon 97498-0818

Tel: 1 (503) 547-3185

Fax: 1 (503) 547-3539

Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1

PRINTED IN USA

Hex Key

•

This is used for the removal and installation of

the 52954 Spindle Nut

Part No. 95049 – 3/16"

Open End Wrench

•

This is used for removal and installation

of drill chuck.

Part No. 96453 – 16 mm

Grease

•

Multi-purpose grease for all types of

bearings, cams, gears.

•

High film strength; excellent resistance

to water, steam, etc.

•

Workable range 0˚ F to 300˚ F.

Part No. 95542: 10oz. Grease Tube

Part No. 95541: Push-Type Gear Oil Gun

•

One-hand operation.

Bearing Press Tool

•

Use with (#2) arbor press to achieve accurate

press of bearings and motor parts.

Part No. 96240

Part No. 96244

Part No. 96216

Part No. 96239

2" Bearing Separator

•

Used to remove bearings, gears, and other components.

Part No. 96346

Email: [email protected]

DYNABRADE

PD09.61_rev.1_12/09