Dynabrade 64100 Operating Manual

Browse online or download pdf Operating Manual for Industrial Equipment Dynabrade 64100. Dynabrade 64100 8 pages. 21" metalworking station

Print Page
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Model:
64100 (120 Volt AC)
Work Surface: 21" Long x 12" Deep.
Keep workplace area free
of contaminants while deburring.
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
should always be strictly followed including the instructions listed below:
WET DEBURRING STATION SAFETY INSTRUCTIONS
1. Always use a grounded power supply. There is an increased risk of
electric shock with an ungrounded power supply.
2. Don't expose to rain or wet conditions. There is an increased risk of
electric shock if the switch, cord or motor are wet.
3. Do not abuse the power cord. Never use the cord to move the station.
Never use the cord to pull the plug from an outlet. A damaged cord
increases the risk of electric shock.
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
21 " Metalworking Station
Operating Manual
S A F E T Y L E G E N D
WARNING
WARNING
WARNING
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
When operating this equipment, basic precautions
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
WARNING
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
WARNING
Electric shock hazard. Avoid bodily contact with
grounded objects, bodies of water.
Do not damage cord set.
4. Use caution when opening or closing guards, screens, etc. Switch
power off and unplug cord before opening. Remove all work pieces
and tools before opening to avoid injury. Keep fingers and hands
clear when closing to avoid injury.
5. Never use to exhaust chemical vapors
6. Vibration may occur if unit is unlevel.
7. Unplug power cord when accessing blower compartment area.
8. Power switch must be off when servicing filter.
Reorder No. PD08.12
Supersedes PD06.31
36"
9"
12"
21"