Daymak BOOMERBEAST 2.0 D User Manual - Page 18

Browse online or download pdf User Manual for Scooter Daymak BOOMERBEAST 2.0 D. Daymak BOOMERBEAST 2.0 D 19 pages.

Print Page

Maintenance

Always ensure that your tire pressure is to the recommended value of your unit. You can nd the PSI

value on the side of each tire.

Check your brakes before you ride, make sure they are rm and the unit does not move while they are

being pulled.

Check that all lights are working, headlights brake lights and signal lights.

When storing it outside, use a cover to prevent weather damage to the unit. If possible bring the whole

unit inside. Otherwise if possible bring the battery inside.

Bring in your unit to your local Daymak dealer for a yearly check up if possible.

Do not over charge the battery, once the battery is fully charged unplug it as soon as possible.

Whenever you get o your vehicle put on the brake lock. This will prevent it from rolling away down

hill, and will also stop someone from accidentaly engaging the motor while o the vehicle.

When engaging the throttle always start slowly to get a feel of how quickly the unit may move.

When braking, use your rear brakes rst, and then your front brakes for safest stopping.

An additional lock is advised when leaving it outside for extended periods of time, secure a safe lock to

the frame to prevent theft.

Do not randomly change settings you are unfamiliar with on the Bluetooth app as it may cause damage

to the unit, consult the manual rst before changing settings.

If the display does not turn on at all when you put the key in the ignition check the breaker switch un-

derneath the seat to see if it is set to "ON"

If the machine turns on (display etc.) however the motor does not run, make sure the brake lock is not

on. The motor will not engage as long as any brake is being pressed.