CEL MeshConnect B1010SP0-EVB-1 User Manual - Page 8

Browse online or download pdf User Manual for Motherboard CEL MeshConnect B1010SP0-EVB-1. CEL MeshConnect B1010SP0-EVB-1 18 pages. Bluetooth smart evaluation board

Print Page
3.
Some of the default settings need to be customized for your particular evaluation kit, including:
a.
Bluetooth Address
b.
Crystal Trim
c.
Device Name
The Bluetooth Address and Crystal Trim need to match the values printed on the target board label.
4.
Open the hr_sensor_cs101x_A05.keyr file in the SDK and change the values &BDADDR and &CRYSTAL_FTRIM to match
the label.
Figure 12 - Location of Bluetooth Address and Crystal Trim Values to be Modified
5.
For the Bluetooth Address, the Endian format of the value on the label must be converted as shown below.
This document is subject to change without notice.
Document No: 0019-02-08-01-000 (Issue B)
Date Published: September 9, 2015
B1010SP0-EVB-1 Evaluation Board User Guide
Figure 11 - Example Target Board Label
Figure 13 - Example Bluetooth Address Conversion
8