DYNACO DYNALOGIX II DY 4000 Electrical Manual - Page 5

Browse online or download pdf Electrical Manual for Controller DYNACO DYNALOGIX II DY 4000. DYNACO DYNALOGIX II DY 4000 14 pages.

Print Page

D ruNfiO

DY 4000

Setting Limits

5. Press and release the Enter button. Display should change to Clslimit.

6. Press and release the Enter button. Display should change to JogToCls.

See figure 2.0-3.

7. Press the JOG DOWN button to bring the door down to desired close

position. See figure 2.0-3.

Press the

JOG DOWN

button to bring

door down.

Display

should read:

Figure 2.0-3: Jog Down Button

lf door moves in the opposite direction of JOG DOWN button, door is out of phase.

Turn power off and switch T2 & T3 on the terminal block. Turn power on and return

to step one of the set limit section (2.0/Stepl).

8 . Press and Release the ENTER button to save limit setting. Display will

change back to: Glslimit_Set--OK .

Press and release either red arrow buttons to scroll up or down to the

PhtLimit (photo eye shut off position). See figure 2.0-4.

9 .

Press and

release either

arrow buttons

to scroll up or

down to:

1 0 .

1 1 .

Figure 2.0-4: Arrow Buttons (Scroll)

Press and release ENTER button. Display will change to:JogToPht-Enter.

Use the JOG UP/RESET button to bring door up one inch above the photo

eyes. See figure 2.0-5.

-@b-

,:i,?i: _@il

M E N U -

E N T E R -

DYNACO USA, INC,

?te.4?adp, hDaaz Sa/trq &Deaiy