DYNACO DYNALOGIX II DY 4000 Electrical Manual - Page 9

Browse online or download pdf Electrical Manual for Controller DYNACO DYNALOGIX II DY 4000. DYNACO DYNALOGIX II DY 4000 14 pages.

Print Page

g ltrltftO

4.0

DY 4000

Manual & Automatic Close Timers

Setting the Manual & Automatic Glose Timers

The Dynalogix ll has two automatic close timers. The first timer, MG/PB timer,

will count down after a activation is installed on terminal number 2 (most

commonly used for pull cords or pushbuttons). MC/PB timer also can be

turned on or off, making it manual operation or automatic operation simply by

assigning a countdown value to the timer. The second timer, AC/Loop timer,

will count down after a activation is installed on terminal 4 (most commonly

used are motion sensors and loops). lf this timer is set to zero, the door will

come down after door reaches upper limit.

4.1

Setting MC/PB Timer

'1. Press and release MC/PB Timer button on the Dynalogix ll controller.

The display will change to: MC Delay_Time=##. See figure 4.1-1.

MC/PB

Timer

Figure 4.1-1: MC/PB Timer

2. Use the Up and Down arrow buttons to change the countdown time to the

desired duration. The Dynalogix llwill automatically save any changes that

are made. See fioure 4.1-2.

lncrease

Setting

Decrease

Setting

Figure 4.1-2: Raise/Lower Manual Timers

-ffif ih?i: -Wil @ V

M ! N U -

' " r r *

DYNACO USA, INC,

7/e.4a&n

caDaaz Sd/4rq ADear:fn