CEL PS1 POWERstick User Manual - Page 12

Browse online or download pdf User Manual for Lawn and Garden Equipment CEL PS1 POWERstick. CEL PS1 POWERstick 16 pages. 10.8v li-ion cordless powerstick

Print Page

1. Battery and Charging

Grass Trimmer

If any part of this product is damaged or worn

in any way do not use it, consult your retailer.

To fit the grass trimmer attachment first ensure

the POWERstick is switched off and there is no

chance that the trigger will be accidentally

activated. Ensure there is no dirt or debris that

will become trapped in the mechanism or foul the

contacts. See the POWERstick section for how to

atttach a tool.

Extend the POWERstick as required and rotate

the head to the desired orientation.

To rotate the head, press the two rotation buttons

together and alter the head angle, release to lock

in place. If the buttons do not pop out

immediately move the head angle slightly until

they pop out, locking the head securely.

Blade

Ridge

Flywheel

Wall Guide

Rotation Buttons will

stop the motor when

pressed to prevent

injury.

To fit a blade, first remove any worn or damaged

blade by rotating it so the larger part of the

keyhole is closer to the centre of the flywheel,

push outward until the large part of the keyhole is

over the blade pin and lift the blade off. Take a

new blade and place the larger part of the

keyhole over the blade pin, pull the blade so the

smaller part of the keyhole locks over the blade

pin then rotate the blade outside the flywheel

making sure the ridge on the flywheel locks it in

place.

New blades will cut grass more cleanly and leave

grass healthier, the outer part of the cutting area

has the most cutting power. Replacement blades

available CEL part Number PSTB01. Commonly

known as Safety Cutter Blades.

The Wall Guide will keep the blades from

impacting with walls, trees and edging. To extend

the guide just pull out until it locks in place, this

will allow you to cut all the way to the edges

without damaging them or the blade. Press the

guide in to allow the blade to cut closer or for

storage.

8.0

Release Catch