GREAT PLANES fokker DR-1 Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Toy GREAT PLANES fokker DR-1. GREAT PLANES fokker DR-1 20 pages.

Print Page

❏

3. Locate the ABS wing fairing. Trim the front and back as

needed for a good ﬁ t. Use medium CA to secure it in place

as shown.

Install the Top Wing

❏

1. Gather the 12 strut mounts together and carefully study

the photo above. The differences are fairly obvious but to

avoid confusion, arrange them as they are in the photograph

and mark the tab of each set according to the photo.

❏

2. Grab the two strut mounts that you marked "A" and

insert them into the pockets on the top wing as shown. They

are designed to ﬁ t only one way. If you observe a large gap

between the wing and strut mount, remove it and try it the

other way. DO NOT glue them into place at this time.

❏

3. Grab the two strut mounts that you marked "B" and

insert them into the pockets on top of the middle wing as

shown. DO NOT glue them into place at this time.

❏

4. Locate the two cabanes and install them as shown

using four 2mm x 6mm [5/64" x 15/64"] self-tapping screws

as shown. Remove the screws and apply a couple of drops

of thin CA into each hole to harden the threads. Re-install

the cabanes.

❏

5. Put the top wing in place atop the cabanes and secure

it with four 2mm x 6mm [5/64" x 15/64"] self-tapping screws.

Remove the screws and apply a couple of drops of thin CA

into each hole to harden the threads. Re-install the top wing.