GREAT PLANES Kunai Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Toy GREAT PLANES Kunai. GREAT PLANES Kunai 17 pages. Model aircraft great planes kunai

Print Page

ASSEMBLE THE FUSELAGE

❏

1. Bolt the wing to the fuselage with the plastic wing bolt

plate. Use a ﬁ ne-point felt-tip pen to mark the outline of the

bolt plate on the wing.

❏

2. Remove the wing from the fuselage and lightly cut 1/16"

[1mm] inside the line you marked for the plate. Use a paper

towel square lightly dampened with denatured alcohol to wipe

away the ink line (too much alcohol will wick the ink under the

covering). Peel the covering from the top of the wing.

❏

3. Using care not to get any glue on the threads of the bolt,

glue the wing bolt plate into position by bolting the assembly

to the fuselage.

Glue on the Tail Surfaces

❏

1. Same as was done for the aileron horns, wet the plywood

elevator and rudder horns with thin CA, and allow the CA to

harden. Then, mount the screw-lock connectors and glue

the horns into place.

❏

2. Test-ﬁ t, but do not glue the horizontal stabilizer (stab)

to the vertical stabilizer (ﬁ n) and install (but do not glue)

the wood elevator joiner. Move the elevators up and down,

making sure the joiner clears the curved slot. Make any

adjustments necessary so the elevator will move smoothly.