Dynacord Power Amplifier DPA 4245 Owner's Manual - Page 3
Browse online or download pdf Owner's Manual for Amplifier Dynacord Power Amplifier DPA 4245. Dynacord Power Amplifier DPA 4245 14 pages. 2 x 450 watts/ 2 x 600 watts pro matrix system
Also for Dynacord Power Amplifier DPA 4245: Owner's Manual (17 pages)
Print Page
DESCRIPTION
Especially designed for permanent installations, the DPA-Series power amplifiers offer performance-con-
sistent and reliable operation of PA-systems with 2 individual loudspeaker lines, each. Therefore,
DPA-Series power amplifiers are most suitable for company intercom, alarm and background music
transmission installations in offices and commercial areas, congregation and sport centers, schools,
houses of worship, hotels, hospitals, shopping malls and super markets, cruise ships, and other similar
applications.
Each power amplifier incorporates two high-performance output transformers. Next to 100 V, 70 V, and
25 V floating outputs, the direct outputs provide the possibility to also drive loudspeaker systems with
low-impedance down to a minimum of 4 ohms. Simultaneous operation of low-impedance speaker
systems and floating loudspeaker lines on a single output channel of the power amplifiers is possible as
well.
The integrated 45 Hz LO-cut filter with 18 dB/oct. slope protects the connected loudspeaker lines from
unwanted ultra-low frequencies.
Comparator circuitry constantly monitors the input and output signals of the power amplifiers and activates
their internal limiters whenever non-linear operation is encountered which reliably protects the connected
loudspeaker systems against overload conditions and clipping, saturation of the power supply transfor-
mers, and overvoltage at the outputs. The DPA-Series power amplifiers' transmission and sound qualities
are absolutely superb. The employed comprehensive dimensioned power supply units with low-interfe-
rence toroidal transformers ensure that the stated nominal performance specifications are accomplished,
even in most demanding and critical installations. Since the DPA-Series power amplifiers do not employ
V/I-Foldback-Limiter circuits, operation on complex loads up to ±90° phase angles is possible without a
problem.
Quick optical information on the power amplifiers' momentary operational status is provided through easily
readable LED indicators, individually showing whether a channel is ready for operation, a signal is present
at the output, if any of the limiter circuits and/or one of the protection circuits has been activated.
The inputs are electronically balanced and carried out as XLRF-type and as binding post clamping
connectors as well. Parallel linking the two connector types at the input provides the possibility to utilize
the carried-through signals to feed additional power amplifiers, without the necessity for special split-cab-
les. Both inputs can be optionally retrofitted with input transformers. Through Input Routing switches it is
possible to configure the DPA-Series power amplifiers for stereo, parallel-monaural, or bridged-mode
operation.
The dB-scaled level controls – extremely precise and good to operate potentiometers – are located on
the rear of the appliances. A Ground-Lift switch which helps eliminating ground noise loops by separating
the amplifier circuit ground from the common ground of the enclosure is also to be found on the rear
panels. Conveniently connecting the loudspeaker lines to the power amplifiers is provided through a
binding post strip, where all voltages – 25 V, 70 V, 100 V – and the low-impedance output are present on
individual screw-clamp connectors. The rear panel service mains switches allow turning the power
amplifiers' power on directly. Using the provided power remote input, remote-start is also possible.
Consistent thermal stability of the power amplifiers is obtained through extremely silent running fans which
are automatically switched stepwise depending on the amplifiers' operation mode. The front-to-rear air
circulation guarantees trouble-free operation in rack-shelf enclosures of any size.
Several other features of the DPA-Series power amplifiers are revealed within this owner's manual.
Therefore, please take the time to carefully and entirely read the provided information.
17