AFG 13.0AT User Manual - Page 16

Browse online or download pdf User Manual for Treadmill AFG 13.0AT. AFG 13.0AT 20 pages.
Also for AFG 13.0AT: User Manual (19 pages)

Print Page
AFG 13.0AT User Manual
¸%%¸¸¸
MONTH
MONTHLY GOAL
WEEK#
DISTANCE
CALORIE$
TIME
MONTHLY TOTALS:
MONTH
MONTHLY GOAL
WEEK #
I
DISTANCE
I
CA/-ORIE$
I
TIME
MONTHLY TOTALS:
ii ¸ _
/
i¸¸ i_
ii/iii
_iiiiiii
W
MONTH
MONTHLY GOAL
WEEK #
DISTANCE
CALORIE$
TIME
MONTHLY TOTALS:
13.0AT
Rev.l.7.indd
30-31
COMMON P RODUCT QUESTIONS
ARETHE SOUNDS M YTREADMILL MAKES NORMAL ?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new
treadmills. This noise will diminish over time, although may not totally go away. Overtime, the belt wifl
stretch, causing the belt to ride smootherover the rollers.
WHY I$ THETREADMILL I PURCHASED LOUDER THAN THE ONE ATTHE STORE?
All fitness products seem quieter in a large store showroombecausethere is generally more background noise
than in your home.Also, there will be less reverberationon a carpeted concretefloor than on a woodoverlay
floor. Sometimesa heavyrubber mat will help reducereverberation through the floor. If a fitness product is
placed close to a wall, there will be more reflected noise.
WHENSHOULD I BE WORRIED ABOUTA NOISE?
As long as the soundsyour treadmill makes are no louder than a normal conversational tone of voice,it is
considerednormal noise.
TROUBLESHOOTING-
TREADMILL
Yourtreadmill is designed to be reliable and easy to use. However,if you experiencea problem, please reference the
troubleshootingguide listed below.
PROBLEM: Theconsole doesnot light up and/or the belt doesnot move.
SOLUTION,", Verifythe following:
DOESTilEREDLIGNTONTilE ON/OFF SWITCNLIGNT UP?
IF YES..
,, Doublecheckthat all connectionsare secure,especially the consolecable. Unplugand reconnectthe console
cable to verify.
,, Make sure the consolecable is not pinched or damaged in any way.
,, Turnthe power off, unplug the power cable and wait 60 seconds.Removemotor cover. Wait until aft red LED
lights havegone off on the motor control board beforeproceeding.Next,verify that none of the wires connected
to the lower board are loose or disconnected.
IF NO:
0
0
0
Verifythat the outlet the machine is plugged into is functbnal. Doublecheck that the breakerhas not tripped,
it is on a dedicated 20-amp circuit, it is not on a GFCIequipped outlet, and it is not plugged into a power
strip/surge protector or extensioncord.
Thepowercord is not pinched or damagedand is properlyplugged into the outlet ANDthe machine.
Thepowerswitch is turned to the ONposition.
4/1/08
3:41:17PM