HiB Beam 50 Operation Instructions - Page 2

Browse online or download pdf Operation Instructions for Personal Care Products HiB Beam 50. HiB Beam 50 2 pages.
Also for HiB Beam 50: Quick Start Manual (2 pages)

HiB Beam 50 Operation Instructions
Wiring Diagram (Fig. B)
Earth is Green and Yellow
Neutral is Blue
LUMINAIRE
How to Isolate the sensor so you can switch ON & OFF with a mains switch (Fig. C)
How the mirror is wired.
live
earth
neutral
Charger socket/transformer
Sensor switch controller
LED driver
Heated mirror pad
Rewire the mirror as shown in the diagram above. HiB recommends that all electrical bathroom products should only be fitted by a suitably
qualified, Part P registered electrician.
For further assistance on isolating the sensor please contact us at:
Tel:
+44 (0)20 8441 0352
Email:
Caution
We recommend that you place this mirror on a soft flat surface to ensure
no breakages. We also recommend that you leave corner protectors on
until final fitting
WEEE compliance
Must not be mixed with general household waste
T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
Live is Brown
E:
live
earth
neutral
How to isolate the sensor.
live
earth
neutral
Charger socket/transformer
Sensor switch controller
LED driver
Heated mirror pad
Please do not lift the product by the plastic diffusers as
this may cause damage to your product.
hib.co.uk
Live supply can be Red or Brown
Earth supply is Green and Yellow
Neutral supply can be Blue or Black
MAINS SUPPLY