DaySequerra M4 Series User Manual - Page 15
Browse online or download pdf User Manual for Tuner DaySequerra M4 Series. DaySequerra M4 Series 16 pages. Hd radio tuner
Print Page- 1. Table of Contents
- 2. Important Safety Information
- 3. Service Information
- 4. Introduction
- 5. M4 Series Key Features
- 6. M4 Series Technical Specifications
- 7. Unpacking and Installing
- 8. Front Panel Controls and Indicators
- 9. M4 Series Operating Description
- 10. Sample VFD Displays
- 11. Performance Loss Monitor
- 12. M4.2R Ethernet Port Setup
- 13. Three Year Warranty
Alarm Configuration Enable or Save
•
Highlight desired "ENABLE" option to arm selected alarms and save alarm
configuration or "SAVE" option to save alarm configuration without arming alarms.
Use UP and DN switches to toggle the setting.
A
E
N
Push "SELECT" to continue. The alarm configuration settings are saved in non-volatile
memory.
Activate Alarm - Activate tuner alarm conditions saved in configuration by holding SELECT and
PRESETS buttons both in for 5 seconds to enter ALARM CONFIG menu and selecting "ENABLE"
using UP and DN switches to toggle the setting. Pushing "SELECT" arms the alarms; tuner VFD
alternates between "ALARM SET" message and normal VFD display for the station. Front panel of the
tuner is locked whenever alarm is armed to prevent false alarm conditions.
De-activate Alarm - To de-activate the configured alarm functions, hold SELECT and PRESET buttons
both in for 5 seconds. Tuner VFD display returns to normal operation and front panel of the tuner is un-
locked.
Alarm Notification and Reset - When any alarm is active, audible alarm will sound (modulated
beeping, if Alarm Buzzer has been set to "ON") and second line of VFD will scroll an alarm message
indicating "ALARM" and the specific alarm that is active, for example "ALARM – RF CARRIER LOSS,
PRESS SELECT TO CLEAR". Pressing SELECT and PRESETS buttons will clear all alarms.
If during an alarm active condition the alarm condition is corrected, the tuner will reset to its state before
the alarm occurred and the audible alarm will cease. The tuner alarms as configured will remain active
until de-activated by the user, as described above.
M4.2R Ethernet Port Set-up
The M4.2R adds includes DaySequerra's Remote Dashboard
application, and an Ethernet interface to provide remote control monitoring for both AM and FM HD
TM
Radio
broadcasts as well as a robust alarm panel for HD Radio
Please email your M4.2R serial number and contact information to [email protected] or
register your unit on our website www.daysequerra.com to obtain the password for CD-ROM
containing the Remote Dashboard
came with your M4.2R. Follow the instructions in the Remote Dashboard
M4.2R's IP address and complete the software installation before connecting the PC and using your
M4.2R for the first time.
In the event that you encounter any difficulties with your DaySequerra Remote Dashboard
feel free to contact us at 856-719-9900. Our office hours are from 9 to 5 ET, Monday through Friday.
Or you can email your questions to: [email protected].
L
A
R
M
A
B
L
E
TM
software application, supporting firmware and User Guide that
C
O
N
F
>
S
A
TM
software, a proprietary PC-based
TM
signal and data attributes.
TM
I
G
V
E
<
User Guide to change your
TM
, please
M4 User Manual
15