GREAT PLANES Wright Flyer Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Toy GREAT PLANES Wright Flyer. GREAT PLANES Wright Flyer 16 pages. Almost ready to fly electric powered r/c airplane
Print Page
2. Install a plastic bellcrank on the right motor strut post
extending below the bottom of the bottom wing, using a
plastic standoff and 2mm x 8mm wood screw. If required,
enlarge the hole in the bellcrank with a 5/64" [2mm] drill bit
so that the screw slides freely into the hole.
Install the bellcrank with the flange on the plastic standoff
against the wing. The long arm of the bellcrank should face
forward and the short arm should face the wing tip. Do not
install the screw until the next step.
3. Install a short aileron pushrod wire connecting the
short arm of the bellcrank to the aileron control horn. The
wire should be inserted in the outer hole on the bellcrank
and the second hole closest to the wing on the control horn.
Install the 2mm x 8mm screw on the bellcrank. Do not
overtighten the screw.
4. Install a long aileron pushrod wire connecting the
long arm of the bellcrank to the servo arm. The wire should
be inserted in the second hole from the end on the bellcrank
and the outer hole on the longest arm of the servo horn. Do
not install the screw holding the servo horn to the servo until
the next step.
5. In the same manner, install the left aileron bellcrank,
plastic standoff, 2mm x 8mm wood screw and pushrods to
the left aileron. The long arm of the bellcrank should face aft
as shown in the photo above. Install the servo horn on the
servo and secure it with the horn screw supplied with
the servo.
6. Insert the elevator pushrod into the outer hole on the
longest arm of the elevator servo horn. Install the servo horn
on the servo and secure it with the horn screw supplied with
the servo.
9