HiB Orbital Manual - Page 4
Browse online or download pdf Manual for Personal Care Products HiB Orbital. HiB Orbital 4 pages.
Print Page
This product is suitable for installation in zones:
All installations must comply with guidelines which are based on a zonal concept. The diagram above
illustrates this concept and must be followed to ensure the safe installation of electrical appliances in
the bathroom. These regulations apply to domestic installations only. Installations must be made in
accordance with the current IEE wiring regulations and relevant building regulations. HiB recommends
that all electrical bathroom products should only be fitted by a suitably qualified, Part P registered
electrician.
Live is Brown
Earth is Green and Yellow
Neutral is Blue
LUMINAIRE
Wiring Diagram
(Fig 2)
Electrical Safety Information
HiB recommends that all electrical bathroom products should only be fitted by a suitably qualified,
Part P registered electrician in accordance with current IEE reguations. Ensure mains power supply is
switched off before starting installation. Before drilling, ensure there are no hidden cables or pipes in
the wall.
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB customer services, contact detail
shown below.
T:
+44 (0)20 8441 0352
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and
make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
Live supply can be Red or Brown
live
earth
Earth supply is Green and Yellow
neutral
Neutral supply can be Blue or Black
F:
+44 (0)20 8441 0219
&
2
Please Note
These products must be installed
with a minimum distance of 150mm
between the infra-red sensor switch
and any surface or object to ensure
MAINS SUPPLY
correct operation of the sensor.
E:
Outside Zone
hib.co.uk
(Fig1)