ADEMCO VISTA 5140XM User Manual - Page 13

Browse online or download pdf User Manual for Security System ADEMCO VISTA 5140XM. ADEMCO VISTA 5140XM 15 pages. Commercial fire & burglary alarm system

Print Page

SUMMARY OF AUDIBLE NOTIFICATION

(ALPHA DISPLAY CONSOLE)

SOUND

CAUSE

LOUD, INTERRUPTED

FIRE ALARM

Console & external*

LOUD, CONTINUOUS

BURGLARY/AUDIBLE

Console & external

EMERGENCY ALARM

ONE SHORT BEEP

a. SYSTEM DISARM

(not repeated)

Console only

b. SYSTEM ARMING

ATTEMPT WITH AN

OPEN ZONE.

c. BYPASS VERIFY

ONE SHORT BEEP

SYSTEM IS IN

(once every 15

BURGLARY TEST

seconds) Console only

MODE

TWO SHORT BEEPS

ARM AWAY OR

Console only

MAXIMUM

THREE SHORT

a. ARM STAY OR

BEEPS

INSTANT

Console only

b. ZONE OPENED

WHILE SYSTEM IS IN

CHIME MODE.

c. ENTRY

WARNING**

RAPID BEEPING

a. FIRE

Console only

SUPERVISORY

b. TROUBLE

c. AC POWER LOSS

ALERT

SLOW BEEPING

a. ENTRY DELAY

Console only

WARNING**

b. EXIT DELAY

WARNING

(if programmed)

Fire alarms may be programmed by your installer to produce continuous

external sounds, but always produce interrupted console sounds.

Entry warning may consist of three short beeps or slow continuous beeping,

as programmed by your installer.

– 24 –

DISPLAY

FIRE is displayed; descriptor of zone in

alarm is displayed.

ALARM is displayed; descriptor of zone

in alarm is also displayed.

a. DISARMED/READY TO ARM is

displayed.

b. The number and descriptor of the

open protection zone is displayed.

c. Numbers and descriptors of the

bypassed protection zones are

displayed (One beep is heard for each

zone displayed). Subsequently, the

following is displayed: DISARMED

BYPASS Ready to Arm

Faulted Zone identifications will appear.

ARMED AWAY or ARMED MAXIMUM

is displayed. Red ARMED indicator is

lit.

a. ARMED STAY ZONE BYPASSED or

ARMED INSTANT ZONE BYPASSED

is displayed. Red ARMED indicator is

lit.

b. CHIME displayed, descriptor of open

protection zone will be displayed if the

[*] key is pressed.

c. DISARM SYSTEM OR ALARM WILL

OCCUR is displayed.

a. SUPV displayed. Descriptor of faulted

zone is displayed.

b. CHECK displayed. Descriptor of

troubled protection zone is displayed.

c. AC LOSS displayed (may alternate

with other displays that may be present).

a. DISARM SYSTEM OR ALARM WILL

OCCUR is displayed. Exceeding the

delay time without disarming causes

alarm.

b. ARMED AWAY or ARMED

MAXIMUM is displayed along with You

May Exit Now

GLOSSARY

ARM/DISARM: "Armed" simply means that the

burglary portion of your system is turned ON and

is in a state of readiness. "Disarmed" means that

the burglary system is turned OFF, and must be

rearmed to become operational. However, even

in a "disarmed" state, "emergency" and "fire"

portions of your system are still operational.

KEYPAD: This is the area on your Console

containing numbered pushbuttons similar to

those on telephones or calculators. These keys

control the arming or disarming of the system,

and perform other functions which were

previously described in this manual.

DELAY ZONE: An area of protection containing

doors most frequently used to enter or exit

(typically, a front door, back door, or door from the

garage into the building). The delay zone allows

sufficient time for authorized entry or exit without

causing an alarm. Consult your installer for the

entry and exit delay times that have been set for

your system during installation.

PROTECTION POINT DESCRIPTIONS

ID DESCRIPTION

ID numbers 01-64 represent sensor/detector protection zones. ID 70-75, 97 represent

system problems (CALL FOR SERVICE IMMEDIATELY)

Service Company:

Telephone:

DAY/NIGHT ZONE: An area of protection whose

violation causes a trouble indication during the

disarmed (DAY) mode and an alarm during the

armed (NIGHT) mode.

FIRE SUPERVISORY ZONE: A zone which

monitors a fire sprinkler system to determine that

main water valve is open or that there is

adequate water pressure.

BYPASS: To disable a specific area of fire or

burglary protection while leaving other areas

operational. Also, to disable the operation of a

specific system output circuit such as a bell

output.

ALPHA DESCRIPTOR: A zone description (up

to 3 words) such as "WEST WING SMOKE"

which is displayed along with the zone number

on the console display window when a zone is

faulted.

ZONE: A specific area of protection.

ID DESCRIPTION

– 25 –