Daytime BC16 Operating Manual - Page 6

Browse online or download pdf Operating Manual for Controller Daytime BC16. Daytime BC16 12 pages. Single-channel for matrix

Print Page

1. Setup and initial usage

All electrical connections and components (except for the power plug) should be connected to

each other according to the following examples. Observe any relevant safety instructions!

Example with one converter and one daytime

matrix light, with an output of max. 240 watts:

Example with one converter, one two-way distributor (optionally available), and two daytime

matrix lights, with a total output of max. 240 watts:

2. Plug in the mains power plug or switch on the power supply /

supplies.

Note: During initial usage or after the power reserve of approximately 15 minutes has expired (e.g.

after a power failure), the status LED flashes red and displays: "Set clock!".