EmergoPlus PowerXtreme XS140 User Manual - Page 11
Browse online or download pdf User Manual for Inverter EmergoPlus PowerXtreme XS140. EmergoPlus PowerXtreme XS140 15 pages. Solar set
Print Page
User manual Solar set XS
For an esthetical nice result, you can apply tape to
▪
locations that you don't want glued.
Apply the distance tape to one of the surfaces to be
▪
glued. Remove the adhesive back of the tape.
The tape will ensure fixation during the curing of the
sealant. In addition, the tape ensures the required
adhesive thickness, which is 2-3 mm between the
adhesive surfaces.
Cut
the
▪
accompanying image. First cut it horizontally, then cut
out a red triangle.
Apply a triangle adhesive bead onto the surface to be
▪
glued. Keep the sealant tube at 90° relative to the surface.
Position the part and press the glue up to the desired glue
▪
thickness
Excessive glue can be removed or smoothed by use of an
▪
angled cut-off piece of PVC pipe. Before use, immerse the
pipe into water with detergent. Run the piece of pipe
across the adhesive bead to achieve a smooth result. You
can also lightly moisten the adhesive bead with a plant
E18-XSSolarset-EN-01
nozzle
of
the
of
www.emergoplus.com
sealant
tube
conform
2-3
Page 11 of 15
mm.