Daytona 57745 Owner's Manual & Safety Instructions - Page 3

Browse online or download pdf Owner's Manual & Safety Instructions for Racks & Stands Daytona 57745. Daytona 57745 8 pages. Gear driven rotating engine stand

Print Page
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text
under subheadings therein before set up or use of this product.
1.
Attach 3-1/2" Casters (15) to the straight, back section of
the Base (8) using Bolts (11), Spring Washer (10), and Nuts
(9). Insert Bolts from the bottom, through the Casters first.
2.
Attach 3" Casters (16) to the angled, front sections of the
Base (8) using Bolts (12), Spring Washers (10), and Nuts
(9). Insert Bolts from the top, through the Base first.
3.
Attach Support Foot (42) and End Cap (41) to Base.
Support Foot (42)
Base (8)
3-1/2"
Caster (15)
Bolt (11)
Figure A: Base Assembly
4.
Attach a 3-1/2" Caster (15) to the end of each Leg (17)
using Bolts (11), Spring Washers (10), and Nuts (9).
5.
Place Legs (17) into slots in Base with Casters turned
downward. Use two Leg Lock Pins (13) to secure each
Leg. Secure each Leg Lock Pin with an R-Pin (14).
6.
Attach Support Foot (42) and End Cap (41) to Leg (17).
Leg Lock
Pin (13)
Support
Foot (42)
Figure B: Leg Assembly
Item 57745
Caster (15)
Bolt (12)
3" Caster
(16)
Leg Lock
Pin (13)
Support
Foot (42)
Leg (17)
End Cap (41)
3-1/2" Caster (15)
For technical questions, please call 1-888-866-5797.
7.
Attach Mounting Arms (25) to Mounting Plate with Bolts
(37), Big Washers (36), Washers (29) and Nuts (38).
8.
Attach Column (2) to Base (8) using Bolts
(3), Washers (7), and Nuts (6).
End Cap
(41)
3-1/2"
Bolt (3)
Figure C: Turning Plate Assembly and Column Attachment
9.
Place tops of Braces (5) flat against Column (2),
aligning the holes. Secure Braces (5) by inserting
Bolt (4) from one side of the Column (2) and secure
with Washer (7) and Nut (6) on the opposite side.
10. Secure bottom ends of Braces (5) to Base
using Bolts (3), Washers (7), and Nuts (6).
Bolt (3)
Nut (38) Washer (29)
Mounting
Arm (25)
Washer (7)
Nut (6)
Bolt (4)
Brace (5) Bolt (39)
Washer (7)
Nut (6)
Figure D: Brace Attachment
Big Washer (36)
Bolt (37)
Column (2)
Page 3