GreatCo GE-70 Installation Instructions & Operating Manual - Page 4

Browse online or download pdf Installation Instructions & Operating Manual for Indoor Fireplace GreatCo GE-70. GreatCo GE-70 9 pages. Gallery electric fireplaces

Print Page

TOOLS REQUIRED

Magnetic Phillips Screw Driver

Electric drill or hammer drill (for concrete walls)

UNPACKING THE ELECTRIC FIREPLACE

WARNING! Do NOT use this Electric Fireplace if any part has been under water. Immediately call a

qualified service technician to inspect and to replace any part of the electrical system if necessary.

Keep plastic wrapping away from children.

● Open the packaging carefully and remove the foam.

● Remove and discard the plastic bag.

● Keep the original packaging for future transport and/or storage.

● Check that all listed parts have been included before discarding any packaging.

LOCATING YOUR ELECTRIC FIREPLACE

Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a location

ensure that the general instructions and warnings are followed. For best results, install out of direct sunlight. Power

supply service should be configured before finishing to avoid extra construction.

WARNING ! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the electric fireplace.

Clearance to Combustibles

Sides ............................................2 in. (50 mm )

Floor ...........................................13 3/4 in. (350 mm )

Top .............................................. 0 in. ( 0 mm )

Back ............................................. 0 in. ( 0 mm )

90236 GE50-94 REV A 8-3-12

Fig. 1

Figure 2