DaytonAudio MA1240A User Manual - Page 4
Browse online or download pdf User Manual for Amplifier DaytonAudio MA1240A. DaytonAudio MA1240A 4 pages. Twelve channel multi-zone amplifier
Also for DaytonAudio MA1240A: User Manual (4 pages), User Manual (4 pages)
TYPICAL 6 ROOM INSTALLATION
NOTES ABOUT HUM:
of hum in the audio system, it is still possible that a hum will occur
in rare circumstances. Its safety grounding can create a path for
system. While not dangerous, this energy can cause difficulty with
the auto signal sensing circuit, and at the very least will interfere
with the quiet enjoyment of your system. The first course of action
should be trying to make sure that all of the audio components are
connected to either the same electrical outlet, or at least into the
culprit, so be sure to try disconnecting all coaxial feeds that are
connected to the system. If this solves the problem, install a coaxial
line isolator and reconnect the system. In the very worst case, a
amplifier will usually solve the problem.
Important Safety Instructions
able parts inside. Refer servicing to qualified personnel. To reduce the risk
of fire and shock do not expose unit to rain or moisture. The unit should be
connected to an earth grounded AC electrical socket. The unit should be
ventilation openings.
Note:
Dayton Audio
products are constructed by industry experts, and are thoroughly tested before shipment. Dayton Audio
®
year. This warranty is limited to manufacturer defects, either in materials or workmanship. Dayton Audio
damage to any other unit or component or the cost for installation or extraction of any component of the audio system. In the rare case of a product failure, please
There are no other warranties, either express or implied, which extend the foregoing, and there are no warranties of merchantability or fitness for any particular
purpose. The warranty will not cover incidental or consequential damage due to defective or improper use of products. This includes but is not limited to burnt
voice coils, overheating, bent frames, holes in the cone, or broken lead wires.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Non-Warranty Service:
Rated Power Output:
Bridged Power Output:
Input Sensitivity:
Input Impedance:
Frequency Response:
Distortion:
Distortion (Bridged):
Channel Crosstalk:
Signal to Noise Ratio:
Efficiency:
Power Requirements:
Stand-By Power Rating:
Auto Turn-On Sensitivity:
Dimensions:
Weight:
* The MA1240a complies with the ENERGY STAR and CE EuP directive.
-
Warranty Information
Warranty Limitations
SPECIFICATIONS:
(8 ohm minimum)
controls at max.
*
products are warranted for the period of one
®
®
is not responsible for any consequential on inconsequential
© Dayton Audio
®