Celerity CT Fiber Optic HDMI Detachable Connector User Manual - Page 2

Browse online or download pdf User Manual for Cables and connectors Celerity CT Fiber Optic HDMI Detachable Connector. Celerity CT Fiber Optic HDMI Detachable Connector 2 pages.

Print Page

Connection Diagrams

step

Connect the T Keystone wall plate to

the component with a Celerity HDMI

High Speed cable

Limited Warranty

Celerity Technologies warrants this product against defects in material or workmanship for a period of 12 months from the original date of purchase. Celerity

Technologies will, at its sole option, (i) repair the product using new or refurbished parts, or (ii) replace the product with a new or refurbished product. For purposes

of this Limited Warranty, "refurbished" means a product or part that has been returned to its original specifications. IN THE EVENT OF A DEFECT, THESE ARE YOUR

EXCLUSIVE REMEDIES.

To obtain warranty service, you must deliver the product, postage prepaid, in accordance with instructions at Celerity Technologies' website: http://www.celeritytek.com.

This Limited Warranty only covers product issues caused by defects in material or workmanship during proper consumer or commerical use; it does not cover product

issues caused by any other reason, including but not limited to improper consumer or commercial use, acts of God, misuse, limitations of technology, or modification

of or to the product.

LIMITATION ON DAMAGES

ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO

THE PERIOD OF ONE (1) YEAR FROM THE DATE OF PURCHASE. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, CELERITY TECHNOLOGIES SHALL NOT

BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR

LOSS OF PROFITS, CORRUPTION OR LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL

DAMAGES OR LOSSES ARISING OUT OF RELATED TO YOUR USE OF THE CELERITY TECHNOLOGIES PRODUCT.

Some state or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts,

so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to

state or jurisdiction to jurisdiction. Please register this product at http://celeritytek.com/warranty. Retain your sales receipt for proof of date of purchase.

COMPONENT

VIDEO OUT

VIDEO

OUT

Connect the T DFO connector to the fiber optic

plug on the cable. Then connect to the component.

The detachable connectors are proprietary and

should not be lost or damaged as they only work

with Celerity Fiber Optic cables.

Place the T connector at the source location. Extend

the fiber optic cable to the display (RX).

The Celerity Fiber Optic plugs are clearly

marked T for source (TX) and R for display (RX) and

must be placed correctly.

(available separately)

Install the T Keystone wall plate at the source

location. Extend the fiber optic cable to the

display (RX).

The Celerity Fiber Optic plugs and Keystone

connectors are clearly marked T for source

(TX) and R for display (RX) and must be

placed correctly.

Connect the R DFO connector to the

Extend the fiber optic

fiber optic plug on the cable. Then

cable to the display (RX).

connect to the display.

step

Connect the USB plug (HDMI & DVI only) to an

available USB port on the display component.

This provides power to the connector without

the need for an external power supply.

Extend the fiber optic

Connect the R Keystone wall plate to

cable to the display (RX)

the display with a Celerity HDMI+5V

Keystone wall plate.

USB Power cable

Connect the USB plug to an available USB

port on the display component. This

provides power to the connector without the

need for an external power supply.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

15.105 -- Class B digital device or peripheral

For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent

location in the text of the manual:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

User Guide

step

(available separately)

06/2016