celesco PT8000 Series Replacement Instructions - Page 4

Browse online or download pdf Replacement Instructions for Transducer celesco PT8000 Series. celesco PT8000 Series 4 pages. Measuring cable

Print Page

36.

Connect a voltage meter to potentiometer terminals so positive lead is connected

to S and negative lead is connected to CW.

37.

Rotate entire potentiometer/mounting bracket assembly so output is between 0.04

and 0.1 VDC.

38.

Tighten socket head cap screw to lock sensor bracket in place

39.

Replace sensor cover, making sure o-ring seats properly.

40.

Replace the 4 socket head cap screws that attach the sensor cover to the housing.

Page 4 of 4