GREATLAND TZ51SF-173 Original Instruction Manual - Page 18

Browse online or download pdf Original Instruction Manual for Lawn Mower GREATLAND TZ51SF-173. GREATLAND TZ51SF-173 20 pages. Petrol lawnmowers

Print Page
E- Deck housing
Remove all grass debris from the underside of the cutting deck immediately after each use. If allowed to accumulate,
it will cause rust and corrosion and may prevent proper collection.
Fertilisers and top dressings are extremely corrosive.
Thoroughly clean the cutting deck immediately after use on treated grass and store them well away from
corrosive materials.
F- Off season storage
It is good practise to prepare your lawnmower for storage when not in use.
Clean and lubricate the lawnmower thoroughly • Refer to the engine manual for correct engine storage instructions •
Coat the cutting blade with grease to prevent any corrosion when not in use.
Store the mower in a clean dry area away from corrosive materials like fertilisers.
When storing your lawnmower or any other type of power equipment in a poorly ventilated or metal storage unit,
it is vital that you rust proof the equipment using a light oil silicone, especially cables and all moving parts.
The manufacturer warrants the product against faulty materials and workmanship for a period of 2 years from the
date of first purchase.
The warranty is only valid when the product is used in domestic situations, any machine used for commercial or
professional use involving financial gain or hire is subject to a 90 day warranty (unless otherwise specified by
the manufacturer)
Warranty does not extend to failure due to fair wear and tear.
The manufacturer undertakes to replace their expense, any parts that are classified as defective by them or
authorised stockist.
The machine must be reasonably kept and only used for the operation it was designed and manufactured for.
WARRANTY DOES NOT COVER
Use outside of the machines intended design and operation
Accidental damage
Insufficient maintenance
Incorrect fuel mixture or fuel that is stale
Incorrect assembly, adjustment or operation of the product
Spare parts that are subject to normal wear and tear e.g. blades, nylon heads, bearings, cables, guards,
deflectors,
spark plugs, air filters etc.
Freight and packing costs.
Use of non-genuine spare parts i.e. those from another manufacturer
Use of the machine for any other purpose than that for which it was designed.
READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE
Retain the receipt of purchase without which no warranty can be offered.
KEEP THIS MANUAL FOR FUTURE USES

CONDITIONS OF WARRANTY

18