AFG 4.0 AR User Manual - Page 4

Browse online or download pdf User Manual for Exercise Bike AFG 4.0 AR. AFG 4.0 AR 19 pages. Afg 4.0 ar recumbent bike user's guide
Also for AFG 4.0 AR: User Manual (19 pages)

Print Page
AFG 4.0 AR User Manual
CONSOLE
PULSE GRIP HANDLEBARS
SEAT BACK
SEAT BASE
MAIN FRAME
PEDALS
TOOLS INCLUDED
5mm Allen Wrench
c
13/15mm Flat Wrench
c
Phillip Screwdriver
c
5mm T Wrench
c
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
4.0_AR_Rev.1.7.indd 6-7
WATER BOTTLE HOLDER
REAR STABILIZER TUBE
PARTS INCLUDED
1 Console
1 Rear Stabilizer Tube
c
c
2 Pedals
1 Frame
c
c
1 Seat Back
1 Pulse Grip Handlebar
c
c
1 Seat Back Cover
1 Seat Frame
c
c
1 Seat Base
1 Water Bottle Holder
c
c
7 Hardware Bags
1 Water Bottle
c
c
1 Rear Plastic Cap
c

ASSEMBLY STEP 1

SEAT BACK COVER
ARC WASHER (B)
BOLT (A)
MAIN FRAME
REAR STABILIZER TUBE
REAR PLASTIC CAP
SEAT FRAME
A)
Open hardware bag for step 1
B)
Attach the rear stabilizer tube to the
Main fraMe using 2 bolts (a) and 2
arC washers (b)
C)
Remove the pre attaChed sCrew from
the Mounting braCKet.
D)
Attach the rear plastiC Cap to the Main fraMe using 2 sCrews (K) and the pre attaChed sCrew.
NOTE: Make sure plastiC tabs are positioned on the inside of the guide rail.
E)
Remove one of the rubber bumpers from the seat stop asseMblY. Slide the seat stop asseMblY through
the guide rail and re-attach the rubber bumper to the seat stop asseMblY using the screw and washer.
ADJUST LEVELERS
F)
Adjust 3 PRE-ATTACHED LEVELERS so that the bike does not rock and is level on the floor.
HARDWARE BAG FOR STEP 1 CONTENTS :
REAR PLASTIC CAP TAB PLACEMENT
SEAT-STOP ASSEMBLY
SCREWS (K)
PLASTIC TABS
PRE-ATTACHED
SCREW
REAR PLASTIC CAP
MOUNTING BRACKET
ADJUST HEIGHT
LOCK ADJUSTMENT
ARC WASHER (B)
15.4 mm
SIDE VIEW
Qty: 2
BOLT (A)
20 mm
Qty: 2
SEAT STOP ASSEMBLY
Qty: 1
GUIDE RAIL
SCREW (K)
15 mm
Qty: 2
7/16/07 4:47:28 PM