GAI-Tronics Titan CB Installation And User Manual - Page 6

Browse online or download pdf Installation And User Manual for Telephone GAI-Tronics Titan CB. GAI-Tronics Titan CB 20 pages. Weather resistant telephones

Print Page

Installation

4.1. General

All possible measures must be taken to ensure water, fluid or dust

does not contaminate the internal components of the telephone whilst

unpacking, preparing and installing the telephone in inclement weather

conditions or by negligence.

Failure to do so may invalidate your warranty.

These telephones are supplied without connection leads – cabling to the

telephone network must be supplied and installed by the installer. Because of

this, extra precautions must be observed: installers must ensure that they

have the permission of the owner of the PABX or telephone network to which

the telephone is to be connected, and that installation is carried out by trained

personnel. Contact GAI-Tronics if installation service is required.

Installation details differ between the TITAN and COMMANDER product

ranges –please make sure you know which product you are installing

and refer to the appropriate sections below.

4.2. Emergency Services warning

These telephones are not capable of dialling, and therefore cannot

make direct calls to the emergency services unless the exchange is

configured to do so. Check with your telephone service provider or

infrastructure maintainer whether it is necessary to warn users that

emergency calls cannot be made from this telephone, and if so provide

a suitable warning notice. A warning label, which can be fixed to the

front of the telephone, is provided.

4.3. Titan

To prepare for installation, open the door (where fitted), then undo the

four retaining screws to remove the faceplate from the rear enclosure. A

3mm Allen key is required. Do not remove the plastic cover on the back

of the faceplate.

Caution – take care to support the spring-loaded door whilst open

to prevent it slamming shut and trapping fingers.

All connections and option settings are on the rear of the faceplate

towards the lower edge.

IMPORTANT

Titan CB, Commander CB