DynaGen GSC400 Series Calibration Utility Manual - Page 7
Browse online or download pdf Calibration Utility Manual for Controller DynaGen GSC400 Series. DynaGen GSC400 Series 18 pages. For generator
Also for DynaGen GSC400 Series: Programmer's Manual (4 pages)
Print Page
2.4 AC Current Offset Calculation
offset = -((ACC_ML – ACC_RL) * LOW_CUR_WEIGHTED_AVG + (ACC_MH –
ACC_RH)) / (LOW_CUR_WEIGHTED_AVG + 1)
If offset < -0.252 Then
ACC_O = -126
Else If offset > 0.252 Then
ACC_O = 126
Else
ACC_O = offset / 0.002
End If
2.5 AC Voltage Offset
offset = -((ACV_ML – ACV_RL) * LOW_VOL_WEIGHTED_AVG + (ACV_MH) –
ACV_RH)) / (LOW_VOL_WEIGHTED_AVG + 1)
If offset < -12.6 Then
ACV_O = -126
Else If offset> 12.6 Then
ACV_O = 126
Else
ACV_O = offset / 0.1 ' comment: 1 unit = 0.1V
End If
7 of 18