Automatic Technology GDO-12Hir Quick Operation Manual - Page 5
Browse online or download pdf Quick Operation Manual for Door Opening System Automatic Technology GDO-12Hir. Automatic Technology GDO-12Hir 6 pages. High rolling door opener
Print Page
6 . 0 T R O U B L E S H O O T I N G
Symptom
The opener
does not
work from
the remote
One remote
works but
the other/s
do not
The motor is
running but
the door
remains
stationary
The remote
range varies
or is
restricted
The door
reverses for
no apparent
reason
The Open
LED and
Close LED
are flashing
alternatively
The Open
LED
continues to
flash
The Close
LED
continues to
flash
Possible cause
The opener does not
have power
The battery in the
remote control is flat
The remote button is
not programmed to
operate the door.
Door Code LED is
flashing yet the opener
is not working.
Faulty remote control
Flat battery
The opener is
disengaged
Variations are normal
depending on
conditions e.g.
temperature or
external interference
The battery life is
exhausted
If Safety beams are
installed they may be
partially obstructed
Opener is overloaded
Door obstructed when
opening
Limits may be cleared
Remedy
Plug a device of similar
voltage (e.g. a hairdryer) into
the power point and check it
is OK.
Replace the battery
Code in the remote control
button
Ensure the correct button on
the transmitter is being
pressed.
Replace remote control
Replace battery
Re-engage the opener
Make sure you can see the
door when you use the
remote control
Check the battery status as
per section 4 of this guide
Ensure the beam path is not
obstructed. Check the
alignment of the beams
Discontinue use and contact
1300 133 944 for support
Clear away any obstructions
and test door opens
correctly. (if door is
damaged, contact a door
professional)
Remove all power sources.
Wait (10-15 secs), then
reconnect power. If Blue LED
is flashing, limits are not set.
Contact 1300 133 944.