Automatic Technology GDO-6 EasyRoller Quick Operation Manual - Page 5
Browse online or download pdf Quick Operation Manual for Door Opening System Automatic Technology GDO-6 EasyRoller. Automatic Technology GDO-6 EasyRoller 6 pages. Rolling door openers
Also for Automatic Technology GDO-6 EasyRoller: Installation Instructions (2 pages), Owner's Manual (20 pages)
6 . 0 T R O U B L E S H O O T I N G
Symptom
The opener
does not
work from
the remote
One remote
works but
the other/s
do not
The motor is
running but
the door
remains
stationary
The remote
range varies
or is
restricted
The opener
light does
not work.
The door
reverses for
no apparent
reason
The door
stops of
moves very
slowly
Possible cause
The opener does not
have power
The battery in the
remote control is flat
The remote button is
not programmed to
operate the door.
Door Code LED is
flashing yet the opener
is not working.
Faulty remote control
Flat battery
The opener is
disengaged
Variations are normal
depending on
conditions e.g.
temperature or
external interference
The battery life is
exhausted
LED has failed
If Safety beams are
installed they may be
partially obstructed
Garage door in poor
condition e.g. springs
may be broken
(Optional Battery
Back Up Accessory) the
batteries may have
little OR no charge
Remedy
Plug a device of similar
voltage (e.g. a hairdryer) into
the power point and check it
is OK.
Replace the battery
Code in the remote control
button
Ensure the correct button on
the transmitter is being
pressed.
Replace remote control
Replace battery
Re-engage the opener
Make sure you can see the
door when you use the
remote control
Check the battery status as
per section 4 of this guide
Contact dealer to organise
LED to be changed.
Ensure the beam path is not
obstructed. Check the
alignment of the beams
Check the door's operation
Connect mains power and
leave the batteries to
charge. The batteries may
take 24 to 48 hours to reach
their maximum charge
capacity.