Dayva HS041-2 Instructions Manual - Page 16

Browse online or download pdf Instructions Manual for Heater Dayva HS041-2. Dayva HS041-2 19 pages. Premier outdoor heater

Print Page

DAYVA PREMIERE OUTDOOR HEATER

TROUBLE SHOOTING

PROBLEM 1

Burner won't remain lit.

TEST WITH

GAS ON

CAUSE A

AND REGULATOR

Possible Leak

CONNECTED

SOLUTION

Check all connections

1. Use liquid soap to find leaks. Pour over

connection between hose and regulator and

TEST FOR

regulator to tank. If soap bubbles, leaks are present.

LEAKS HERE

* With all Propane tanks in the US, if a leak is

present the tank will automatically shut-down.

2. Use teflon tape on all connections.

3. Tighten all connections.

4. Check for leaks again. NEVER USE AN OPEN

FLAME TO CHECK FOR LEAKS.

4 Re-light heater to test.

CAUSE B

Thermocouple may be too tight on valve.

* If thermocouple is too tight on valve, it will limit the

amount of millivolt electricity, which keeps the valve

flowing gas.

SOLUTION

BACK

Loosen Thermocouple

FRONT

BACK

1.Remove cover opposite side the control knob with

phillips screwdriver.

2. With a wrench, loosen thermocouple connection

to valve (Copper lead with 1/4" flare fitting)

3. Hand tighten and slightly tighten with wrench. Do

NOT torque or over tighten.

4. Re-light heater to test.

LOOSEN

THERMOCOUPLE

CAUSE C

An Obstruction may be in the Orifice

(see illustration #4 on page 2)

* An obstruction will make the gas flow improperly

and prevent the flame from touching the

thermocouple properly.

SOLUTION

CLEAN THE ORIFICE (as explained for Problem #2)