Dynakit Stereo 35 Instructions For Assembly And Use - Page 2

Browse online or download pdf Instructions For Assembly And Use for Amplifier Dynakit Stereo 35. Dynakit Stereo 35 13 pages. Power amplifier

Print Page

Description

General Wiring Practice

Mechanical Assembly

Wiring instructions

240-Volt Transformers

Installation

In Case of Trouble

Part List

Schematic Diagram

Power Output:

Frequency Response:

Power Response:

Intermodulation Distortion:

Hum and Noise:

Sensitivity:

Input Impedance:

Output Impedance:

Damping Factor:

Minimum Channel Separation:

Power Consumption:

Tube Complements:

Shipping Weight:

C O N T E N T S

S P E C I F I C AT I O N S

35 watts continuous, 45 watts

IHFM Music Power (both channels)

±1db from 10 cps to 40,000 cps.

20 cps to 20,000 cps without

exceeding 1% distortion within

1 db of 17,5 watts each channel.

Less than 1% at 17,5 watts each

channel. Less than 0.1% at

average listening levels.

Inaudible; more than 80 db below

rated output.

1 volt input for 17.5 watts out-

put (each channel).

500,000 ohms.

8 and 16 ohms.

10 from 20 cps to 20,000 cps.

80 db.

100 watts, 50/60 cycle a.c.

7247 (2), 6BQ5/EL84/7189 (4),

silicon diodes (2).

Size:

4" high, 13" wide, 5½" deep.

16 lbs.

Back Cover