Activeforever Conversion II 9003 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Fitness Equipment Activeforever Conversion II 9003. Activeforever Conversion II 9003 20 pages. Conversion ii 9003 trainers

Print Page

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all

packing materials from your area and place them back into the box. Do not dispose of the packing materials

until assembly is completed. Read each step carefully before beginning. If you are missing a part please

call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:

STEP 1:

There is a "R" decal on one end of the FRONT STABILIZER(2). Attach the FRONT STABILIZER(2)

onto the MAIN FRAME(1) with the "R" decal end at right side and secure with SOCKET HEAD BOLTS

(M8x1.25x70mm)(81) and LOCK WASHERS(M8)(89).

STEP 2:

Insert the STOPPER TUBE(48) through the MAIN FRAME(1) and secure with BUTTON HEAD

BOLT (M8x1.25x15mm)(94). Slide the FOOT PLATES(116) on both sides of the STOPPER TUBE(48).

Press the DOME PLUGS(25mm)(78) into both ends of the STOPPER TUBE(48).

NOTE:

The PEDAL STRAPS(47) are pre-assembled to the FOOT PEDALS(46). The pedal and strap

assembly for the left side has a "L" decal. The pedal and strap assembly for the right side has a "R"

decal.

STEP 3:

Insert the PEDAL SHAFT(44) through the MAIN FRAME(1). Place the RIGHT FOOT PEDAL

ASSEMBLY(46R) onto the right end of the PEDAL SHAFT(44) and place the LEFT FOOT PEDAL

ASSEMBLY(46L) onto the left end. Secure the FOOT PEDALS with BUTTON HEAD BOLTS

(M8x1.25x15mm)(94) and LARGE WASHERS(M8)(109) at both ends of the PEDAL SHAFT(44).

You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(94)

NOTE:

at both ends of the PEDAL SHAFT(44) at the same time.

[email protected]