Automation Correct Coal-trol Digital TS2 V3 Instruction Manual - Page 13
Browse online or download pdf Instruction Manual for Thermostat Automation Correct Coal-trol Digital TS2 V3. Automation Correct Coal-trol Digital TS2 V3 16 pages.
Instruction Manual
Extended Menu Operations
DISPLAY
FEED
MENU button
IGNITE
MENU button
MENU
button
Brnout
MENU button
TEST
NOTE
In turn, each control item is
turned on for 5 seconds until
MENU button is pressed.
This can be a good way to
determine if the controls are
connected correctly and to
d e t e r m i n e i f t h e y a r e
working.
Automation Correct LLC
Coal-trol Digital™ - Model TS2 V3
ACTION
Press and hold MENU
button for 5 seconds.
UP or DOWN
FEED 10
button
MENU button
IF IGNITER INSTALLED and (IGN = M)
UP or DOWN
button
MENU button
UP or DOWN
button
MENU button
W h e n
fi n i s h e d ,
"NOFIRE" is added to
the Round-robin display.
Stoker Motor
UP or DOWN
STOKER
button
MENU button
Convection Blower
CNVCTN
Auxiliary Fan
AUX
5/2010 R0
9,8...1
The IGNITE sequence will operate
the stove to start the fire. If
IG1 20
necessary, the fuel is primed onto
the grate before igniting. Before
starting the stove make sure draft
controls are operating.
The Burnout (BRNOUT) sequence
will stop the fuel feed and after a
Bo1 35
time, the combustion blower. It will
then prime fresh fuel onto the grate
and will turn off all the stove
motors, except the Convection fan,
if it is being manually operated.
Mechanical vent motors will only be
turned off if they are controlled by
the Coal-Trol.
Combustion Fan
CMBSTN
IGNITR
Ignition Counter
IC 000
Repeat at STOKER
Page 13
NOTE
Use FEED when manually
kindling a fire to help fill and
even-out the grate.
The display counts down
from 10, once a minute until
complete.
W h e n c o m p l e t e , t h e
thermostat will revert to the
Round-robin display.
Igniter
www.automationcorrect.com