AirCycler g2-k Training Manual - Page 15
Browse online or download pdf Training Manual for Fan AirCycler g2-k. AirCycler g2-k 20 pages.
Also for AirCycler g2-k: Installation & User Manual (11 pages), Installation Testing Manual (2 pages), Installation Testing Manual (2 pages)
Print Page
6.0 CURRENT STATUS & SETTINGS
To get detailed information on the current status of the
AirCycler® g2, press the UP arrow. The status screens are the
same for both Calculated Flow and Calculated Time modes.
Press the UP arrow to advance to each setting.
To view the current settings, press the DOWN arrow during
Normal Operation. Press the DOWN arrow to advance to each
setting.
Pressing the MODE button will take you to current time
settings.
6.0 CURRENT STATUS
MINUTES LEFT
The first display is the number of minutes left in the period (hour).
OUTSIDE AIR TIME ELAPSED
This display shows the number of minutes this period that the outside air damper has
been open with the central fan running.
EXHAUST RUN TIME (If using FanConnect™ switch)
This shows the elapsed run time of the exhaust fan for this time period.
EXHAUST DELAY TIME (If using FanConnect™ switch)
This shows the exhaust delay time set.
6.1 CURRENT SETTINGS
To view the current settings that are programmed in the AirCycler® g2, press the DOWN arrow during Normal Operation.
Press the DOWN arrow to advance to each setting. The display will show the following:
For Calculated Flow mode the screens will show:
•
Required CFM set
•
Set measured outside air CFM
•
Set measured exhaust air CFM*
•
Set exhaust fan delay time*
•
If operating time is enabled:
•
Operating Time On
•
Operating Time Off
6.2 SETTING CURRENT TIME
By pressing the MODE key you will cycle through current time of day and will be able to change it if needed.
Note: There is no need to set the current time if you're not using operation hours.
For Calculated Time mode the screens will show:
•
Exhaust run time set*
•
Outside air time in minutes
•
Exhaust fan delay time*
•
If operating time is enabled:
•
Operating Time On
•
Operating Time Off
*If optional FanConnect™ is connected
15
PRESS THE UP
ARROW FOR CUR-
RENT STATUS
PRESS THE MODE
BUTTON TO CYCLE
THROUGH THE CUR-
RENT TIME OF DAY
PRESS THE DOWN
ARROW TO VEW THE
CURRENT SETTINGS
AC DOC 8.5
REV 7/2020