Activeforever KA1000 Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Alarm Clock Activeforever KA1000. Activeforever KA1000 17 pages. Dual alarm clock with wireless alarm monitoring receiver

Print Page

Mode selector:

You can choose shaker or sound and combine it with light when the alarm is triggered.

Choose shaker and light for a silent alarm. It will wake just you, and not the other. You

may turn on all three sound, light and shaker for a certainly wake up.

Reading lamp or night light:

Built-in night light or reading lamp (if table lamp is installed) will be turned On/Off

from the light switch.

Using LED indicators

Mode LEDs:

The corresponding LED will be illuminated for set up mode.

Active mode LEDs:

ALARM

Under the clock display, there are four active mode LEDs.

Battery: Illuminates when the battery is installed and AC power fails. It indicates that the

clock is working with the battery source.

Sensor: Turns on when it receive of signal from an Alarm Monitor transmitter.

SCT: The SCT LED will turn on when SCT mode is selected. Alarm 1 and alarm 2 will

be de-activated.

Alarm: Turns on when the alarm clock is triggered.

Battery:

KA1000 will operate on one 8.4VDC rechargeable battery during a power outage. Do

not use a regular battery. Power is provided for the sound and the shaker only. The clock

display is blank but the time is still maintained. Consult your local solid waste collection

or disposal organization for recycling or proper disposal of batteries.

The door knock transmitter, and other transmitters, each operates on one CR2032 (in-

cluded). It is normally last for 1 year. Watch the red LED illuminate when the door knock

button is pressed, if it is dim or off, replace the battery.

SCT

SENSOR

- 11 -

BATTERY