Dynalink RTA210 Quick Setup Manual - Page 4

Browse online or download pdf Quick Setup Manual for Network Router Dynalink RTA210. Dynalink RTA210 15 pages. Dynalink adsl router quick setup guide
Also for Dynalink RTA210: Quick Setup Manual (14 pages)

Print Page

STEP 1

CONNECT IT UP

For a step-by-step guide refer to Page 5 Chapter 2 Hardware Description &

Installation of the ADSL Router User Manual on CDRom.

Connect the DSL port of the router into your ADSL jackpoint (telephone wall

socket) with the provided line cord. Never connect through a microfilter.

Connect the LAN port of the router to the Ethernet port of your computer (or

uplink port of a network hub) with the Ethernet cable provided.

Connect the 12V DC power adapter to the PWR jack of router, and plug the

adapter into a mains power outlet. Switch on the router.

Make sure the LAN light on the front panel of the router is on. Otherwise it

indicates a problem with the Ethernet connection.

STEP 2

PREPARE YOUR COMPUTER

A detailed step-by-step guide for Windows 98/NT4.0/2000 can be found on

Page 17 Chapter 4 Setting up PC on the LAN of the ADSL Router User Manaul

on CDRom.

Assign an IP address to your computer. Use 192.168.1.x (x is any number of your

choice between 2 and 254) and subnet mask 255.255.255.0. Specify gateway

as 192.168.1.1 and enter DNS server IP.

For Windows 95/98/ME:

From Control Panel, double click

Network.

Scroll down to highlight TCP/IP

(your network card). Click on

Properties.